Home > Flexible hose, fuel pump>Transfer unit>Transfer unit low pressure>Motorpump low pressure eco bp 50 1-phased 55l/h - DIFF

CODE 309002 - Motorpump low pressure eco bp 50 1-phased 55l/h - DIFF

Not contractual photo

Motorpump low pressure eco bp 50 1-phased 55l/h - DIFF Maximize
Previous Next

Group for domestic fuel. USED : It is used for boilers installations far from the fuel tank. It must be installed near the fuel tank and plugged with the burner strater. The installation is one-pipe that is without return to the tank (the return occurs on the loop of the circuit). In order to determine the necessary flow to supply the installation it needs know the type of supply of the burner pump in place. If this pump is one-pipe ( no pipe connected to the return orifice or filter of recycling) it needs consider the nozzle flow in place and provide a margin of 50% higher.

More details

309002

In stock

Domestic fuel oil motorpumpUSED :It is used for boiler installations far from the fuel tank. It must be installed near the fuel tank and plugged with the burner starter. The installation is one-pipe, the return at the tank being capped (these pumps can't work in two-pipe). To determine the necessary flow tosupply the installation you must know the typeof the pump burner supply in place.If the pump is one-pipe(no pipe connected to the return orifice orfilter of recycling) it needs consider the nozzle flow in place and provide a marginof 50% higher. For a burner pump connected intwo-pipe (filter with return pipe to the tank) it needs consider the flow of the burner pump and provide a margin of 50%higher.TECHNICAL FEATURES :Inlet max height 4 mInlet max length 8 mdiameter suction pipe and return tank 8mmAdjustable pressure of 0,5 to 3 barsFlow 55L/hVoltage : single-phased 220 VoltsPower 130W to 2800 turns/minuteInlet and return 1/4"Pressure outlet 1/8"NOTE: the fuel emulsifies if the heightof suction exceeds 4m and if the length ofpipe is too important that can break the group bu suction of air.So, the better working is working under pressure on the circuit andinstalling the motorpump as close as possible of thetank (example : on the cover)



Accept

We use cookies to provide a better experience. Carry on browsing if you're happy with this, or click here to manage cookies.