Fuel oil line (Page 18)

Filter

Pump SUNTEC- SUNTEC - AE35C98502P

Reference: 301759

The SUNTEC AE oil pump is one-pipe or two-pipe. Incorporating a pressure regulating valve without cut-off function, to purge air, gas through the nozzle line.With pressure gauge on the top Inlet and return 1/4" Short...

Pump SUNTEC- SUNTEC - AN67CK13386P

Reference: 301746

The SUNTEC AN oil pump with pressure regulation valve incorporated with cut-off function Inlet and return 1/4" Short nozzle 1/8" For kerosene, Speed 3450 tr/mn

Fuel pump SUNTEC AN 57C7349 3P- SUNTEC - AN57C73494P

Reference: 301744

With an incorporated pressure regulator and a cut-off function. Rotation : left .Exit jet : left

Fuel pump SUNTEC AN 47D1359 1M- SUNTEC - AN47D13591M

Reference: 301740

With an incorporated pressure regulator and a cut-off function. Rotation : left .Exit jet : right

Pump suntec an 47 c 7342 3p- SUNTEC - AN47C73423P

Reference: 301739

The SUNTEC AN oil pump with pressure regulation valve incorporated with cut-off function Inlet and return 1/4" Short nozzle 1/8"

Pump suntec an 47 c 7218 3p- SUNTEC - AN47C72183P

Reference: 301734

The SUNTEC AN oil pump with pressure regulation valve incorporated with cut-off function Inlet and return 1/4" Long nozzle 1/8"

Pump suntec aj6 cc 1003 2p- SUNTEC - AJ6CC10034P

Reference: 301663

The SUNTEC AJ oil pump has an accomodation and a filter of pump bigger to deliver a increased capacity. This range has the same shaft and hub sizes as J and H pumps and can replace these types.With cut-off function....

Fuel pump SUNTEC AJ 6 CC 1002 3P- SUNTEC - AJ6CC10024P

Reference: 301662

This pump was developed from the series A70, but with a bigger accommodation and pump filter to match the increased capacity. This pump has the same shaft dimensions and the hub that pump J and H therefore this pump...

Pump suntec aj6 cc 1000 4p- SUNTEC - AJ6CC10004P

Reference: 301661

The SUNTEC AJ oil pump has an accomodation and a filter of pump bigger to deliver a increased capacity. This range has the same shaft and hub sizes as J and H pumps and can replace these types.With cut-off function....

Pump suntec aj4 cc 1000 4p- SUNTEC - AJ4CC10002P

Reference: 301611

The SUNTEC AJ oil pump has an accomodation and a filter of pump bigger to deliver a increased capacity. This range has the same shaft and hub sizes as J and H pumps and can replace these types.With cut-off function....

Transformation pump au in ae (991401)- SUNTEC - 991401

Reference: 301589

Accessories pump SUNTEC - Transformation pump AU in AE (991401)

Cover Kit- SUNTEC - 991509

Reference: 301582

For pump AN-AE-AP2-AL-ALE-A2L-AR rotation B-C Range 75-95-77-97 Revision 3

Cover kit (991475)- SUNTEC - 991527

Reference: 301580

For pump AN - AS - AE - AL - AP - AT rotation A-D Range 35-45-55-65-47-57-67 Revision 2-3

Solenoid coil of solenoid valve 24vdc (3713818)- SUNTEC - 3713818

Reference: 301481

Accessories pump SUNTEC - Solenoid coil of solenoid valve 24VDC (3713818)

Solenoid coil of solenoid valve 110v (3713797)- SUNTEC - 3713797

Reference: 301479

Accessories pump SUNTEC - Solenoid coil of solenoid valve 110V (3713797)

Solenoid valve pump ap 220v (991455)- SUNTEC - 991455

Reference: 301472

Accessories pump SUNTEC - Solenoid valve pump AP 220V (991455)

Regulator 0,7 to 3 bars pump an (991500)- SUNTEC - 991500

Reference: 301453

Low pressure regulator 0,7 to 3 bars; Replaces on AN-AS-AE-AL-AT-AP pump only revision 2, the original regulator to get an adjusting range from 0,7 to 3 bars

Regulator 0,7 to 3 bars pump AJ- SUNTEC - 270716

Reference: 301452

Low pressure regulator 0,7 to 3 bars; Replaces on AJ pump, only revision 2 the original regulator to get an adjusting range from 0,7 to 3 bars

Cover gasket (270112)- SUNTEC - 270112 - (X10)

Reference: 301437

For pump type AJ (original piece)

Front seal (2014462)- SUNTEC - 992013

Reference: 301381

For pump Type TA Revision 2/4/5

Pump shaft- SUNTEC - 993010

Reference: 301364

For pump Type E6 - E7 1063/1069

Front seal (270202)- SUNTEC - 991553

Reference: 301342

For pump Type AJ

Ring of increase (3759833)- SUNTEC - 3759833

Reference: 301310

Adapter ring to get a hub of ø 54 mm on a pump with a hub of diameter 32 mm.

Pump SUNTEC- SUNTEC - TA4C40107

Reference: 301275

Fuel pump SUNTEC TA is specially designed for industrial heating applications working with domestic fuel or heavy fuel, with important flow. There is a housing to receive an electric heater facilitating cold starts....

Showing 409-432 of 483 item(s)

Previous
1
|
10
|
15
16
17
18
19
20
21
Next

Left column

Please sign in first.

Sign in

Create a free account to use wishlists.