Page 6 Fuel oil pump and accessories

Filter By

Filter

Pump suntec an 47 c 7342 3p - SUNTEC : AN47C73423P

Reference: 301739

The SUNTEC AN oil pump with pressure regulation valve incorporated with cut-off function Inlet and return 1/4" Short nozzle 1/8"

Pump suntec aj6 cc 1003 2p - SUNTEC : AJ6CC10034P

Reference: 301663

The SUNTEC AJ oil pump has an accomodation and a filter of pump bigger to deliver a increased capacity. This range has the same shaft and hub sizes as J and H pumps and can replace these types.With cut-off function....

Fuel pump suntec aj 6 cc 1002 3p - SUNTEC : AJ6CC10024P

Reference: 301662

This pump was developed from the series A70, but with a bigger accommodation and pump filter to match the increased capacity. This pump has the same shaft dimensions and the hub that pump J and H therefore this pump...

Pump suntec aj4 cc 1000 4p - SUNTEC : AJ4CC10002P

Reference: 301611

The SUNTEC AJ oil pump has an accomodation and a filter of pump bigger to deliver a increased capacity. This range has the same shaft and hub sizes as J and H pumps and can replace these types.With cut-off function....

Transformation pump au in ae (991401) - SUNTEC : 991401

Reference: 301589

Accessories pump SUNTEC - Transformation pump AU in AE (991401)

Cover Kit - SUNTEC : 991509

Reference: 301582

For pump AN-AE-AP2-AL-ALE-A2L-AR rotation B-C Range 75-95-77-97 Revision 3

Cover kit (991475) - SUNTEC : 991527

Reference: 301580

For pump AN - AS - AE - AL - AP - AT rotation A-D Range 35-45-55-65-47-57-67 Revision 2-3

Filter pump (3715747) - SUNTEC : 991604-3715747

Reference: 301567

For pump D revision 3 Dimensions : height 28mm x diameter 51mm

Regulator 0,7 to 3 bars pump an (991500) - SUNTEC : 991500

Reference: 301453

Low pressure regulator 0,7 to 3 bars; Replaces on AN-AS-AE-AL-AT-AP pump only revision 2, the original regulator to get an adjusting range from 0,7 to 3 bars

Regulator 0,7 to 3 bars pump AJ - SUNTEC : 270716

Reference: 301452

Low pressure regulator 0,7 to 3 bars; Replaces on AJ pump, only revision 2 the original regulator to get an adjusting range from 0,7 to 3 bars

Cover gasket (270112) (X 10) - SUNTEC : 270112

Reference: 301437

For pump type AJ (original piece)

Pump shaft - SUNTEC : 993010

Reference: 301364

For pump Type E6 - E7 1063/1069

Ring of increase (3759833) - SUNTEC : 3759833

Reference: 301310

Adapter ring to get a hub of ø 54 mm on a pump with a hub of diameter 32 mm.

Pump SUNTEC - SUNTEC : TA3A40107

Reference: 301272

Fuel pump SUNTEC TA is specially designed for industrial heating applications working with domestic fuel or heavy fuel, with important flow. There is a housing to receive an electric heater facilitating cold starts....

Pump SUNTEC - SUNTEC : T4A107

Reference: 301254

Fuel pump SUNTEC T is specially designed for industrial heating applications working with domestic fuel or heavy fuel, with important flow. There is a housing to receive an electric heater facilitating cold starts....

Pump SUNTEC - SUNTEC : T3A107

Reference: 301252

Fuel pump SUNTEC T is specially designed for industrial heating applications working with domestic fuel or heavy fuel, with important flow. There is a housing to receive an electric heater facilitating cold starts....

Pump suntec j7 cac 1001 4p - SUNTEC : J7CAC10014P

Reference: 301181

The SUNTEC J oil pump incorporates a pressure regulating valve. It is adapted for heavy oil 2.8 to 200cst. With cut-off function. Replaces the old pump. H7. Inlet and return 1/4" conical.Nozzle 1/8"

Pump SUNTEC - SUNTEC : E7NC10015P

Reference: 301173

The SUNTEC E oil pump is robust and reliable to use with medium and light fuel, but she also can used with fuel light with a minimum viscosity of 1,2°E (2.8cSt). With regulator of 14 to 30 bars. types 1001 have a...

Pump SUNTEC - SUNTEC : J7NAK10018P

Reference: 301171

The SUNTEC E oil pump is robust and reliable to use with medium and light fuel, but she also can used with fuel light with a minimum viscosity of 1,2°E (2.8cSt). With regulator of 14 to 30 bars. types 1001 have a...

Pump SUNTEC - SUNTEC : E7NA10697P

Reference: 301170

The SUNTEC E oil pump is robust and reliable to use with medium and light fuel, but she also can used with fuel light with a minimum viscosity of 1,2°E (2.8cSt). The model 1069 is expected for heated fuel, temperature...

Pump suntec e6 na 1001 6p - SUNTEC : J6NAK10018P

Reference: 301161

The SUNTEC E oil pump is robust and reliable to use with medium and light fuel, but she also can used with fuel light with a minimum viscosity of 1,2°E (2.8cSt). With regulator of 14 to 30 bars. types 1001 have a...

Pump suntec e4 nc 1001 6p - SUNTEC : E4NC10016P

Reference: 301153

The SUNTEC E oil pump is robust and reliable to use with medium and light fuel, but she also can used with fuel light with a minimum viscosity of 1,2°E (2.8cSt). With regulator of 14 to 30 bars. types 1001 have a...

Pump SUNTEC - SUNTEC : E6NA10697P

Reference: 301145

The SUNTEC E oil pump is robust and reliable to use with medium and light fuel, but she also can used with fuel light with a minimum viscosity of 1,2°E (2.8cSt). The model 1069 is expected for heated fuel, temperature...

Pump SUNTEC - SUNTEC : AT345B95752PO500

Reference: 301134

The SUNTEC AT3 oil pump has two modes of operation with in-line cut-off function. In addition, it incorporates on the cover a special pressure plug allowing a hydraulic connection in high pressure mode only....

Showing 121-144 of 169 item(s)

Previous
1
…
5
6
7
8
Next

Left column

Please sign in first.

Sign in

Create a free account to use wishlists.