-
Products
-
HVAC & heat pump
-
Water heater parts
-
Electricity
-
Hydraulic
-
Maintenance & Servicing
-
Heating spare parts
-
Air heater
-
Wood pellets
-
Burner
-
Manufacturer
-
Fuel oil
-
Gas
-
Cell and test unit
-
Cable and lug
-
Carbon monoxide and gas detection system
-
Gas hose and accessories
-
Motor and capacitor
-
Piezometer
-
Thermocouple
-
Transformer
-
Gas block and accessory
-
Electrode and probe
-
Gas line
-
Valve
-
Pilot burner and injector
-
Coupling
-
Baffle
-
Burner flange gasket
-
Air flap actuator and servomotor
-
Air flap
-
-
-
Control & Measurements
-
Radiator valves
-
Ventilation & Heat insulation
-
Stock clearance
-
Sanitary
-
At the moment
-
-
Brands
-
Exploded Views
-
Stock clearance
Filter of fuel filter water separator ff3/8" - WATTS INDUSTRIES : 0010080003
FEATURES :diameter : FF3/8 Flow150l/h. Drop flow 0,035m CE. Filter 100? steel inox. High capacity tank with bleed valve (0,30dm3)USE :Essential for older tank accumulating condensation water. Water gets mixed with the fuel, it¿s then necessary to remove it for a good burner efficiency. Blue flame. Low NOX. The fuel must be remained of impurities. with the filter 100 you have the solution at this constraint.
FEATURES :diameter : FF3/8Flow150l/hDrop flow 0,035m CEFilter 100 steel inoxHigh capacity tank with bleed valve (0,30dm3)USE :Essential for older tank accumulating condensation water. Water gets mixed with the fuel, it's then necessary to remove it for a goodburner efficiency. Blue flame. Low NOX The fuel must be remained of impurities.with the filter 100' you have the solution at this constraint.
Safety Information :
Care must be taken when installing and replacing spare parts in the vicinity of fuel oil tanks or reservoirs. To ensure proper operation and safety, it is strongly recommended that these operations be carried out by a qualified technician. Incorrect installation can lead to malfunctions, leaks, fire or safety hazards.