Click for more products.
No produts were found.
-
Products
-
HVAC & heat pump
-
Electricity
-
Hydraulic
-
Heating spare parts
-
Air heater
-
Burner
-
Manufacturer
-
Fuel oil
-
Gas
-
Cable and lug
-
Carbon monoxide and gas detection system
-
Gas hose and accessories
-
Motor and capacitor
-
Piezometer
-
Thermocouple
-
Gas block and accessory
-
Gas line
-
Pilot burner and injector
-
Cell and test unit
-
Electrode and probe
-
Burner flange gasket
-
Air flap actuator and servomotor
-
Transformer
-
Valve
-
Baffle
-
Air flap
-
-
Wood pellets
-
Oven and roaster part
-
Maintenance and servicing
-
Autres pièces pour cheminée, insert et poêle
-
Capteur, écran, télécommande
-
Circuit imprimé
-
Pièce électrique, câble et gaine
-
Extracteur et accessoires
-
Motoréducteur
-
Sonde, thermocouple
-
Tresse insert, cheminée, poêle
-
Bougies
-
Grille en fonte et creuset
-
Pressostat, Thermostat, klixon
-
Ventilateur
-
-
-
Sanitary
-
At the moment
-
Maintenance & Servicing
-
Water heater parts
-
Control & Measurements
-
Radiator valves
-
Ventilation & Heat insulation
-
Stock clearance
-
-
Brands
-
Exploded Views
-
Stock clearance
Click for more products.
No produts were found.
SOLAR Pump- MANTA - 180400012
Designed to feel, clean and empty solar systems . . Motor 230V . Flow rate 2400l/h . Water lift 40m . Tank capacity 20L . Weight 25kg . Sizes : 47x29x62,5cm. It must be used under following conditions: . Maxi pressure working : 10 bars . Suction till : 7m . Liquide temperature : from +0°C to 80°C . Power variation : ± 5% . Pump has to work in its nominal level operating range . Protection : IP44 . Maxi acoustic : >70 dB Equipped : . Very large feeling plug . One 3 way valve . Easy to pump directly from a can. . Comments : The pump is designed to use at last some fat heat exchanger coolant (feeling process). If the pump is only used with water (cleaning process), then without any feeling process, don¿t forget to leave some fat product to prevent it from rusting.. We reco
Brand:
€1,132.01
(tax excl.)
Reference:
Download PDF
904799
Add to wishlist
Designed to feel, clean and empty solar systems
Motor 230V
Flow rate 2400l/h
Water lift 40m
Tank capacity 20L
Weight 25kg
Sizes : 47x29x62,5cm
It must be used under following conditions:
Maxi pressure working : 10 bars
Suction till : 7m
Liquide temperature : from +0°C to 80°C
Power variation : ± 5%
Pump has to work in its nominal level operating range
Protection : IP44
Maxi acoustic : >70 dB Equipped :
Very large feeling plug
One 3 way valve
Easy to pump directly from a can.
Comments : The pump is designed to use at last some fat heat exchanger coolant (feeling process). If the pump is only used with water (cleaning process), then without any feeling process, don't forget to leave some fat product to prevent it from rusting.
We recommend to use POILISIL.
Conforms CEE 89/392-73/23
Pump is not guaranted if it is used with acid
Read more
Motor 230V
Flow rate 2400l/h
Water lift 40m
Tank capacity 20L
Weight 25kg
Sizes : 47x29x62,5cm
It must be used under following conditions:
Maxi pressure working : 10 bars
Suction till : 7m
Liquide temperature : from +0°C to 80°C
Power variation : ± 5%
Pump has to work in its nominal level operating range
Protection : IP44
Maxi acoustic : >70 dB Equipped :
Very large feeling plug
One 3 way valve
Easy to pump directly from a can.
Comments : The pump is designed to use at last some fat heat exchanger coolant (feeling process). If the pump is only used with water (cleaning process), then without any feeling process, don't forget to leave some fat product to prevent it from rusting.
We recommend to use POILISIL.
Conforms CEE 89/392-73/23
Pump is not guaranted if it is used with acid