Express Sludge remover X800- SENTINEL - X800L-12X1L-EXPB
Use : Sentinel X800. It will remove objectionable iron oxide and calcium based deposits from heat exchangers, radiators and pipe work.. Its composition allowsto act as a penetrating dispersant under neutral pH conditions.. Respects the environment .. Can of 1kg
Brand:
€32.35
(tax excl.)
Reference:
Download PDF
904952
Add to wishlist
Respects the environment.
USE:
Sentinel X800 will remove iron oxide and calcium based deposits from heat exchangers, radiators and pipe work.
Its unique composition allows Sentinel X800 to act as a penetrating dispersant under neutral pH conditions.
Dosing:
1% of the volume of water in circulation (1L for a 100L system)2% of the volume of water in circulation for a badly fouled system (2L for a 100L system)Warning: Sentinel X800 will not clear a completely blocked pipe.After cleaning, the system must be drained and rinsed.
Administering X800:
With a pump: inject the product in the tank of the pump and circulate. The product should be circulated, preferably at normal operating temperature, with all valves open and the pump turned to maximum flow for 1 hour minimum. Open systems: dose the product via F&E cistern via a by-pass feeder or an injection pump. Sealed systems: If the system is empty, add the product to any access point before filling. If the system is full, inject the product with an injection pump. Packaging: 20L container
Professional product, if in doubt ask for guidance
Read more
USE:
Sentinel X800 will remove iron oxide and calcium based deposits from heat exchangers, radiators and pipe work.
Its unique composition allows Sentinel X800 to act as a penetrating dispersant under neutral pH conditions.
Dosing:
1% of the volume of water in circulation (1L for a 100L system)2% of the volume of water in circulation for a badly fouled system (2L for a 100L system)Warning: Sentinel X800 will not clear a completely blocked pipe.After cleaning, the system must be drained and rinsed.
Administering X800:
With a pump: inject the product in the tank of the pump and circulate. The product should be circulated, preferably at normal operating temperature, with all valves open and the pump turned to maximum flow for 1 hour minimum. Open systems: dose the product via F&E cistern via a by-pass feeder or an injection pump. Sealed systems: If the system is empty, add the product to any access point before filling. If the system is full, inject the product with an injection pump. Packaging: 20L container
Professional product, if in doubt ask for guidance
You might also like
