Click for more products.
No produts were found.
-
Products
-
HVAC & heat pump
-
Electricity
-
Hydraulic
-
Heating spare parts
-
Air heater
-
Burner
-
Manufacturer
-
Fuel oil
-
Gas
-
Cable and lug
-
Carbon monoxide and gas detection system
-
Gas hose and accessories
-
Motor and capacitor
-
Piezometer
-
Thermocouple
-
Gas block and accessory
-
Gas line
-
Pilot burner and injector
-
Cell and test unit
-
Electrode and probe
-
Burner flange gasket
-
Air flap actuator and servomotor
-
Transformer
-
Valve
-
Baffle
-
Air flap
-
-
Wood pellets
-
Oven and roaster part
-
Maintenance and servicing
-
Autres pièces pour cheminée, insert et poêle
-
Capteur, écran, télécommande
-
Circuit imprimé
-
Pièce électrique, câble et gaine
-
Extracteur et accessoires
-
Motoréducteur
-
Sonde, thermocouple
-
Tresse insert, cheminée, poêle
-
Bougies
-
Grille en fonte et creuset
-
Pressostat, Thermostat, klixon
-
Ventilateur
-
-
-
Sanitary
-
At the moment
-
Maintenance & Servicing
-
Water heater parts
-
Control & Measurements
-
Radiator valves
-
Ventilation & Heat insulation
-
Stock clearance
-
-
Brands
-
Exploded Views
-
Stock clearance
Click for more products.
No produts were found.
Elesta mixing valve 4 way type h4mg25 ff1"- E.R.E REGULATION - H4MG25-8
FUNCTION, Mixing valves allow for an optimal functioning of the boiler and to obtain the desired room temperature whatever the season and temperature variations. Mixing valves can be motorized and can function with different regulations. TECHNICAL CHARACTERISTICS: Maximum static pressure : 10 bars (1 MPA) Maximum temperature: 110°C. Minimum temperature: -30°C Maximum decline of differential pressure 200 kPa. CONSTRUCTION : Valve body : bronze. Ball axe: brass Washer : PPO Exterior plate: Zinc O-rings : EPDM 4 way valve brass MG type controlled by motors 60 series. POWER : 50 kw radiator circuits. 22 kw heating floors. Diameter : Female 1", Flow : 8 in m3 for loss of charge of 1 bar, Dimensions : Center Distance 82mm, Height 105mm
€48.82
(tax excl.)
Reference:
Download PDF
109199
Add to wishlist
| H (mm) | 41.0 | |
| Longueur (mm) | 82.00 | |
| Logo Marque | ELESTA | |
| Puissance (détails) | 10kW / 25kW | |
| Ø | F1" | |
| DN | 25.0 | |
| B (mm) | 34.5 | |
| C (mm) | 71.5 | |
| H1 (mm) | 105 | |
| Kv (m3/h) | 8.00 | |
| PN (bar) | 10 |