Filter By
Filter By
Reference: 803041
Out-of-Stock
Many burners are connected with a 6 male poles plug. The same piece can be connected between different installation equipment such as the circulator, the regulation and the control board. For the 6 poles plug, we...
Reference: 802215
Out-of-Stock
This tool allows very easy curving of electrodes with 2 milling notches of 2,6 and 3,4 mm
Reference: 802136
Out-of-Stock
Made of : - 6 square terminals 802120 - 6 straight terminals 802110 - 6 Rajah terminals 802130 - 6 screw terminals 802140
Reference: 802135
Out-of-Stock
fem insulated terminal diam 6.35
Reference: 802127
Out-of-Stock
For terminal Ø 6.35mm
Reference: 802120
Out-of-Stock
To be crimped with bend cover
Reference: 802100
Out-of-Stock
Ø 6 mm - length 5m
Reference: 801507
Out-of-Stock
This standard flame sensing probe can be curved on demand. Packaging 1 Piece
Reference: 801090
Out-of-Stock
kit components : - 2 electrodes Ø 6 x 55 - thread long 100 - connector Ø 6,35 - 2 electrodes Ø 8 x 60 - thread long 100 - connector Ø 6,35 - 2 electrodes Ø 11 x 70 - thread long 100 - connector Ø 6,35 - 2 electrodes Ø...
Reference: 704460
Out-of-Stock
Head diam 6mm x lgth 48mm Total lgth 900mm Gas valve connection M8
Reference: 704240
Out-of-Stock
This burner pilot can be used in many cases. Standard burner pilot can replace specific burner pilot with lateral gas inlet Natural gas injector Propane and butane gas injector with vertical inlet (or adjustable...
Reference: 807360
Out-of-Stock
ECB2 water heater element in incoloy 800 8 Watt/cm2 voltage 220 volt connection with silicon cable (200 mm), mounted on thread stainless steel fittings M10 ECB2 is supplied with nuts and gaskets....
Reference: 807309
Out-of-Stock
Screw-on immersion heater with immersion sleeve
Reference: 807307
Out-of-Stock
Screw-on immersion heater with immersion sleeve
Reference: 807274
Out-of-Stock
Magnesium anodes are important for immersion heater element protection. It's better to replace them. When anode ref : AZ 63 is too long you may cut it with a saw
Reference: 807272
Out-of-Stock
Magnesium anodes are important for immersion heater element protection. It's better to replace them. When anode ref : AZ 63 is too long you may cut it with a saw
Reference: 807268
Out-of-Stock
Model without nut threaded fixation ØM8 Diam 21.3mm Length660mm
Reference: 807128
Out-of-Stock
Fitted on the new water heaters of SITAM - ARISTON - THORFLAM (Ariston Belgium)
Reference: 807060
Out-of-Stock
Heating element - Ø52mm standard monoblock 3600
Reference: 807015
Out-of-Stock
Heating element - Ø52mm standard monoblock 1200
Reference: 309290
Out-of-Stock
Pump for KIT MIDI (domestic fuel) TECNICAL FEATURES: Inlet max height 4 m. Inlet max length 8 m, diameter suction pipe and forcing back 25mm. Flow 2280L/h for total height 35 metres (suction and forcing back...
Reference: 902510
Out-of-Stock
Zinc-plated grip pliers with one-hand operation.